VSC3100B
RGB strobe controller with 3outputs
Order ref.: VSC3100B
Advanced controller with three outputs of 6A each, necessary in controlling DCM SISTEMES strobe lighting systems. Specially designed for controlling mixed lighting packages.
This controller performs a current regulation in each shot, allowing adjustments in lighting power without changing the pulse widths of the shooting.
Specifications
| Dimensions | 109x86x30mm |
| Channels | 3 outputs |
| Max. Current per channel | 6A |
| Max. Current | 18A (joining all outputs into one channel). |
| Power supply | +24VDC ±3%. |
| Power adjust | 255 levels of control at each independent exit from 0mA to the maximum level set. |
| Scalable | Up to 24 outputs and a total of 8 devices can
be controlled through one VCP100 configuration cable, by
interconnecting the strobe controllers using the interface port and
the VCL cable.
|
| Port Control | USB programming cable VCP100* (Non included). * Indispensable for setting up the strobe controller. RS232, RS485 or Ethernet adapter (Consult). |
| Pulse width range | Configurable between 24µS...2mS in steps of 1µS. |
| Pulse delay | Between 30µS and 13.1mS in steps of 1µS. |
| Max. trigger frecuency | 1000 Pulses/S at full power. |
| Trigger edge | Selectable. |
| Memory | 16 memory banks to hold preset output currents. |
| Trigger input | Opto isolated. |
| Trigger output | For camera. Auto-trigger (enables live imaging). |
| Thermal protection | √ |
| Fixing points | Two M4 screw grooves for panel anchoraging. |
| Updatable Firmware | √ |
Downloads
Software (DCM-Control-Manager-Install-1.2.3)
How to configure strobe camera (ES) (DCM-Sincronizacion-estrobo)
Standard devices quickguide (VSC3100B)
PDF Manual (VSC3x00B-EN-R003)
Contact
DCM Sistemes
Pol. Ind. 'El Oliveral', C/ X esquina con C/ G. 46190 - Ribarroja del Turia. Valencia (España)
Tel.:(+34) 96 166 65 27 | Fax: (+34) 96 166 65 24
info@dcmsistemes.com | www.dcmsistemes.com
Link: https://www.dcmsistemes.com/en/products/accessories/vsc3100b/