DCM Sistemes - Products - dkl

Specifications

General specifications

External dimensions	188x188x13mm
Inner diameter	130mm
Recommended working distance	<10mm
Available types	Powered Continuous Strobe iBlueDrive
Available lighting colors	400nm 470nm 525nm 630nm 850nm W00
...	...

See complete general specifications

Specifications by type

Type (+)	Power supply	Connector	Power cable	External driver (+)
Continuous (C)	24VDC ±3%	N/A	2P with flying leads. Length: 1800mm	No
iBluedrive (i)	24VDC ±8%24VDC ±8%	3P aerial. Length: 150mm	VCC Series (not included)	ST00 / SE (sectores)
Powered (P)	24VDC ±3% \| Duty cycle ½ 60s Ton max.	N/A	2P with flying leads. Length: 1800mm	No
Strobe (S)	Strobe Controller	N/A	2P with flying leads. Length: 1800mm	VST Series (not included)

Maximum instantaneous consumption* (mA)

Type (+)	Color (+)
	400nm	470nm	525nm	630nm	850nm	W00
Continuous (C)	N/A	210	210	210	120	N/A
iBluedrive (i)	1220	1220	620	1220	1220	1220
Powered (P)	265	N/A	N/A	N/A	N/A	270
Strobe (S)	1320	1320	825	880	1045	1055

NOTES
* Refer to operating specifications of each type of lamp. (+ info)

To obtain this product in multiespectral version and/or in other wavelengths please check availability by emailing us or via the contact form.

Page 2
Main Dimensions

Connection

2P flying leads Diagram connection

VCC series cable

Page 3
Part number

The part number is composed by the model, the color, the type of lamp and the modifier. Modifiers are only available in some models and they are optional except in case of the emission angles. In the case where the angle cannot be specified, it will be considered "medium angle".
To obtain this product in multiespectral version and/or in other wavelengths please check availability by emailing us or via the contact form.

Model

DKL1813A

Color (+)

-XXX

- 400 (UV)

- 470 (Blue)

- 525 (Green)

- 630 (Red)

- 850 (IR)

- W00 (White)

Type (+)

Y

P = Powered

C = Continuous

S = Strobe

i = iBlueDrive

Optional modifiers* (+)

/Zz

/4S = 4 sectors

*Consult modifiers code to add it to the part number. (+ info)

Some combinations of the options shown above may not be supported as standard. Use the reference generator to generate a valid reference. For any other combination, please check availability at info@dcmsistemes.com .