Inline driver
Driver on the aerial connector cable for iBlueDrive and continuous type equipment.
The driver is placed in the cable that connects the lighting with the connector, it contains the control electronics of the device and is used when it is not possible to integrate it inside the lighitng in both iBlueDrive and continuous types. Functionally, there is no difference between lightings with inLine or integrated driver.
The inline driver is in charge of managing the power of the device, therefore it is advisable to fix it to a metal structure to improve the heat dissipation that it produces.
There are 6 different models of inline drivers and each of them is used with a particular lighting model, depending on its power needs or environment in which it will be used.
Standard (ST00)
Standard driver
Standard driver used in most of the equipment with external driver both in continuous type and iBlueDrive. Used in ALD, ALS, ALU, ALW, AUB, BKC, BKL* , DKL, DOM0906A, DOM1410A, DOM1613A, DOM2414A, PLA, PLD, PLU, PRF (iBlueDrive) , PRY, SAC, SAL*.
*except BKL0303A, BKL2515A and SAL0202A
| IP rating | Dimensions (mm) | Material | Technical drawing |
|---|---|---|---|
| IP50 | 65x33x11.5 | Aluminium |
 
|
Standard IP67 (ST01)
IP67 standard driver
IP67 standard driver used in most of the devices with external driver in both continuous type and iBlueDrive that require IP65/IP67 protection.
Used in BKL*,
DOM0906A, DOM1410A, DOM1613A, DOM2414A, PRD0500B.
*except BKL0303A and BKL2515A
| IP rating | Dimensions (mm) | Material | Technical drawing |
|---|---|---|---|
| IP67 | 100x56.5x22 | Aluminium |
|
Low Power (LP)
Low power driver
Low power driver used in most of the equipments that have external driver both in continuous type and iBlueDrive that require less power.
Used in
| IP rating | Dimensions (mm) | Material | Technical drawing |
|---|---|---|---|
| IP50 | 80x19x9 | ABS |
|
High Power (HP00)
High power driver
High power driver used in most of the equipments that have external driver both in continuous type and in iBlueDrive that require more power.
It is used in DOM1613A.
| IP rating | Dimensions (mm) | Material | Technical drawing |
|---|---|---|---|
| IP50 | 100x72x23.5 | Aluminium |
|
High Power IP67(HP01)
High power IP67 driver
High power driver used in most of the equipments that have external driver both in continuous type and iBlueDrive that require more power and IP65/IP67 protection.
Used in DOM1613A.
| IP rating | Dimensions (mm) | Material | Technical drawing |
|---|---|---|---|
| IP67 | 100x72x23.5 | Aluminium |
|
Multisector (SE)
Driver in multisector devices
Driver used in most of the equipments that have external driver in iBlueDrive type in its multisectorial versions (both RGB and 4 sectors).
It is used in DKL1813A, DOM0906A y DOM1410A
| IP rating | Dimensions (mm) | Material | Technical drawing |
|---|---|---|---|
| IP50 | 100x64x15 | Aluminium/ABS |
|
