VCU

Interconnect lighting systems for PLD and PLU series.

Interconnect lighting systems from PLD and PLU, whenever we want to use multiple devices of these series in a single application, avoiding wiring from each device to the power source.
With VCB 2 poles female connector on each side.

Specifications

*Check for sizes larger than 150cm.

Connections

Adapter cable from VCB (male) connector to VCC (female) connector.

It is a special cable that allows us to connect systems with 3 pin connector to 2 pin connector. This connection allows forcing the continuous mode for iBluedrive systems or for systems with control terminal without the need of an extra wiring. In this case, the control cable would be bridged with GND.

Specifications

*Check for sizes larger than 150cm.

Connections

Adapter cable from VCC (male) connector to VCB (female) connector.

It is a converter cable from VCC 3 pin to VCB 2 pin connector. It is designed for linking led lighting systems with 2 pins in applications with DCM systems with 3 pin connector. Thus, in case you need to change the lighting system in an application, it is not necessary to change all the wiring. The Control cable in this case would be disconnected.

Specifications

*Check for sizes larger than 150cm.

Connections

Interconnection cable between VCB female to M12 male.

It is a cable that connects VCB 2 pin female cables to M12 male. With this cable we can connect DCM systems with 2 pins in applications where M12 connections are used. For example, we can connect DCM systems directly to COGNEX cameras that have connectorl light control connection, such as the In-Sight 7000, In-Sight 9000 and the DataMan 300 allowing us to power the light in continuous mode directly from the camera.

Specifications

*Check for sizes larger than 150cm.

Connections

Interconnection cable from VCC female to M12 male.

Connection cable between VCC 3 pin female cables to M12 male connector. With this cable we can directly connect 3 pin DCM lighting systems in applications where M12 connection is used. For example, we can link DCM systems directly to COGNEX cameras with connectorl light control connection, such as the In-Sight 7000, In-Sight 9000 and the DataMan 300 allowing us to power the light and control it directly from the camera software.

Specifications

*Check for sizes larger than 150cm.

Connections

Example: COGNEX DataMan 300 camera directly connected to a BKL0303A-630C system in continuous mode.

Interconnection cable from VCB male to VCB female(x2).

VCB Y Splitter cordset that allows to power two lights from just one cable. On one side it has an aerial male VCB connector and on the other side two aerial female VCB connectors connected in parallel. This is very useful in installations where there is only one VCB cable installed and we have two DCM Sistemes systems.

Specifications

*Check for sizes larger than 150cm.

Connections

Interconnection cable from VCC male to VCC female(x2).

VCC Y Splitter cordset that allows to power two lights from just one cable. On one side it has an aerial male VCC connector and on the other side two aerial female VCC connectors connected in parallel. This is very useful in installations where there is only one VCC cable installed and we have two DCM Sistemes systems.

Specifications

*Check for sizes larger than 150cm.

Connections

Interconnection cable from VCB male to VCB female(x3).

VCB Y Splitter cordset that allows to power three lights from just one cable. On one side it has an aerial male VCB connector and on the other side three aerial female VCB connectors connected in parallel. This is very useful in installations where there is only one VCB cable installed and we have three DCM Sistemes systems.

Specifications

*Check for sizes larger than 150cm.

Connections

Interconnection cable from VCC male to VCC female(x3).

VCC Y Splitter cordset that allows to power three lights from just one cable. On one side it has an aerial male VCC connector and on the other side three aerial female VCC connectors connected in parallel. This is very useful in installations where there is only one VCC cable installed and we have three DCM Sistemes systems.

Specifications

*Check for sizes larger than 150cm.

Connections

Interconnection cable from VCB male to VCB female(x4).

VCB Y Splitter cordset that allows to power four lights from just one cable. On one side it has an aerial male VCB connector and on the other side four aerial female VCB connectors connected in parallel. This is very useful in installations where there is only one VCB cable installed and we have four DCM Sistemes systems.

Specifications

*Check for sizes larger than 150cm.

Connections

Interconnection cable from VCC male to VCC female(x4).

VCC Y Splitter cordset that allows to power four lights from just one cable. On one side it has an aerial male VCC connector and on the other side four aerial female VCC connectors connected in parallel. This is very useful in installations where there is only one VCC cable installed and we have four DCM Sistemes systems.

Specifications

*Check for sizes larger than 150cm.

Connections

Interconnection cable from VCC male to VCC female(x5).

VCC Y Splitter cordset that allows to power five lights from just one cable. On one side it has an aerial male VCC connector and on the other side five aerial female VCC connectors connected in parallel. This is very useful in installations where there is only one VCC cable installed and we have five DCM Sistemes systems.

Specifications

*Check for sizes larger than 150cm.

Connections

Interconnection cable from VCB male to VCB female(x5).

VCB Y Splitter cordset that allows to power five lights from just one cable. On one side it has an aerial male VCB connector and on the other side five aerial female VCB connectors connected in parallel. This is very useful in installations where there is only one VCB cable installed and we have five DCM Sistemes systems.

Specifications

*Check for sizes larger than 150cm.

Connections

Connection cable between VCC3 pin male cables to M8 female connector.

Connecting cables between 3-pin male VCC cables to M8 female connection. This cable is used to directly connect DCM lighting equipment with M8 connection to applications and installations using VCC connections.

Specificaciones

*Check for other lengths.

Connections