VCC

3 poles power cable with free terminals

For series: ALB, AMS, AUB, DOL, PLA, PLC, PRC, PRF, PRH, SAR and iBlueDrive devices.

* Except DOLnnn0C

Specifications

No. Poles	3
Section	2 x 0.5mm² + 1 x 0,20mm²
Connector	Normal or angled connector
Conductor	Flexible and polished coopper s/UNE-EN 13602
Isolation	Composed of PVC type TI52 s/EN 50290-2-21
Mechanical part	PVC black color type TM51
Nominal voltage C.A.	≤250V
Nominal voltage C.C.	≤300V
Test voltage	1000V
Temperature	-15ºC a +70ºC
Security	No fire propagator s/UNE-EN 60332-1-2
Resistance 0,50mm²	39mΩ/m conductor*
Resistance 0,20mm²	108mΩ/m conductor**
Maximum current 30ºC	5Amp.
External diameter	4,9±0,15mm
Minimum bend radius	25mm @ 20±10ºC ambient temperature

*Conductor meters by which current flows are usually twice the length of the cable since current goes by the positive conductor and comes back by ground conductor. So, a resistance of 78mΩ/m will be present.
** In this case a resitance of 216Ω/m will be present

Connection according to type of lamp (+)

	Colour	Type C	Type P	Type S	Type i
PIN 1	RD	+VDC	+VDC	OUT (+)	+VDC
PIN 2	BU / BK	GND 1 (-)	GND 1 (-)	OUT 1 (-)	GND
PIN 3 bichromatic lamps monochromatic lamps with control	GN	GND 2 (-) CONTROL	GND 2 (-) CONTROL	OUT 2 (-) CONTROL	CONTROL

Order reference

The order reference for a cable with normal connector is composed of model and lenght. In case of ordering a cable with right angle connector (optional), please add its code at the end.

Model

VCC

Cable length (m) *

018

* Consult for other measures

Modifier (optional)

-AC1 = Front angled connector
Outputs the cable in the same direction as the bias mark of the device’s male chassis connector.

-AC2 = Rear angled connector
Outputs the cable in the opposite direction of the bias mark of the device’s male chassis connector.

/FX = Flexible cable
Flexible cable for cable carrier chains

Example: VCC 018: Cable of 1.8m length with normal connector
VCC018-AC1: Cable of 1.8m length with right angle connector that outputs the cable to the opposite direction as the bias point of the male chassis connector.

Main Dimensions

Cable diagram with right angle connector (two options available):

*Dimensions referred to a plugged cable. Tolerance class in accordance with ISO 2678 medium.

Downloads

PDF technical drawing (VCC)

ZIP draft (VCC)

Contact

DCM Sistemes
Pol. Ind. 'El Oliveral', C/ X esquina con C/ G. 46190 - Ribarroja del Turia. Valencia (España)
Tel.:(+34) 96 166 65 27 | Fax: (+34) 96 166 65 24
info@dcmsistemes.com | www.dcmsistemes.com
Link: https://www.dcmsistemes.com/en/products/accessories/vcc/